KTM 690 SMC R EU - 10 Tuning the Chassis; 10.1 Fork;shock absorber

9 SERVICE SCHEDULE 58
K10N K100A K200A
Check the front brake fluid level. ( p. 87) • • •
Bleed the fork legs. ( p. 70) • •
Check the steering head bearing play. • • •
Change the spark plug. •
Check the valve clearance. x
• •
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and sleeves for cracking, leaks, and incorrect
routing. x
•
Check the antifreeze and coolant level. ( p. 126) • • •
Check the cables for damage and routing without sharp bends. x
• •
Check that the throttle cables are undamaged, routed without sharp bends and set correctly. • • •
Change the air filter. Clean the air filter box. x
• •
Check the fuel pressure. x
• •
Check the CO adjustment with the KTM diagnostics tool. x
• •
Check/rectify the fluid level of the hydraulic clutch. ( p. 85) • •
Check the screws and nuts for tightness. x
• • •
Change the rear brake fluid. x
•
Change the rear brake fluid. x
•
Check the clutch. x
•
Check the headlight setting. ( p. 124) • • •
Check that the radiator fan is functioning properly. x
• • •
Final check: Check the vehicle for roadworthiness and take a test ride. • • •
Read out the fault memory using the KTM diagnostics tool after a test ride. x
• • •
Make the service entry in KTM DEALER.NET and in the service record. x
• • •