2-41
Installing and Setting up the Machine > Network Setup
Wireless LAN Connection by Wi-Fi Direct Using Wi-Fi Setup Tool
To send the Wi-Fi settings configured in the Wi-Fi Setup Tool to the machine, connect the computer or handheld
device with the machine locally.
To use Wi-Fi Direct, confirm that the Wi-Fi Direct is enabled (Wi-Fi Direct is set to [On]) and Restart Network from
the operation panel, before your computer will be connected to this machine with Wi-Fi Direct.
1
Display the screen.
[Home] key > [...] > [System Menu] > [Network Settings] > "Network Settings" [Wi-Fi Direct Settings]
2
Configure the settings.
[Wi-Fi Direct]: [On] > [OK]
3
Restart the network.
[Home] key > [...] > [System Menu] > [Network Settings] > "Network Settings" [Restart Network] >
[Restart]
4
Connect a computer or a handheld device with the machine.
5
Launch the Wi-Fi Setup Tool.
1 Launch a web browser.
2 Enter "https://kyocera.info/" to the browser's address bar or location bar.
3 Enter and search the product name, and select this product from the candidate list.
Configure the settings on the operation panel if your computer supports WPS.
Wi-Fi Settings (page 8-40)
Wireless Network (page 8-51)
Setting Wi-Fi Direct (page 2-44)
To Next Page
Loading...
Need help?
General