8-56
Setup and Registration (System Menu) > System Menu
The configuration methods are as follows:
1
Display the screen.
[Home] key > [...] > [System Menu] > [Security Settings] > [Security Quick Setup]
2
Select a security level according to your operating environment.
3
Configure the security function as necessary.
4
Restart the device or network.
Interface Block Setting
[Home] key > [...] > [System Menu] > [Security Settings] > "Interface Block Setting"
This allows you to protect this machine by blocking the interface with external devices such as USB hosts or
optional interfaces.
If the User Authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login User Name or Password, please contact your Administrator.
Refer to the following for the settings of each security level.
Security Level on page 8-57
Restart Entire Device (page 8-64)
Restart Network (page 8-53)
Item Description
USB Host
This locks and protects the USB port (USB host).
Value: Unblock, Block
USB Device
This locks and protects the USB interface connector (USB Device).
Value: Unblock, Block
USB Drive
This locks and protects the USB memory slot.
Value: Unblock, Block
This function is available when USB Host is set to [Unblock].
Optional Interface
This locks and protects the optional interface slots.
Value: Unblock, Block
You can set this feature for each slot.
Restart Entire
Device
Restart the machine without turning the power switch off.
After changing "Interface Block Setting", restart the network or turn the machine OFF and
then ON.
To Next Page
Loading...
Need help?
General