Kyocera FS-1900 - Available Option Memory;Device; Expansion Memory (DIMM)

1-6
FS-1900
1-1-2 Available option memory/device
(1) Expansion memory (DIMM)
The following option memory DIMMs are available for use with the printer. For more informations
about DIMM, refer to Section 2-2-3 Expanding the memory (DIMM) on page 2-10.
NOTE Availability of the following memory DIMMs, manufacturers, and
specifications may change without notice. No responsibility is assumed by
Kyocera Mita with respect to loss or damage caused by the use of these
DIMMs. Only the following DIMMs are certified the for use with the printer.
Manufacturer Capacity Model
Melco Inc. 16 MB PM-HP-16M-KC
32 MB PM-HP-32M-KC
64 MB PM-HP-64M-KC
128 MB PM-HP-128M-KC