Kyocera FS-1900 - Removing the Laser Scanner Unit

FS-1900
5-37
5-2-12 Removing the laser scanner unit
1. Remove the top cover/face-down output tray. See pages 5-9.
2. Remove two connectors 1.
3. Remove four screws 2.
4. Remove the laser scanner unit 3 from the frame unit.
CAUTION When refitting the laser scanner unit, fix the four screws in the order indicated
above.
Figure 5-2-34 Removing the laser scanner unit
3
2
1
2
3
4
Order of fixing the laser scanner unit
1