Kyocera FS-1900 - DIMM Specifications; Expanding the Memory (DIMM); Minimum Memory Requirements

2-10
FS-1900
2-2-3 Expanding the memory (DIMM)
The FS-1900 comes standard-equipped with 16 MB of main memory. The FS-1900 can be expanded
up to the maximum of 144 MB (16 MB + 128 MB). Expansion should be done using optional
DIMMs (Dual In-line Memory Module).
(1) Minimum memory requirements
(2) DIMM specifications
Resolution
Printing environment 300 dpi 600 dpi 1200 dpi
(Emulation) (Fast mode)
PCL6, duplex mode = None 8 MB 8 MB 8 MB
PCL6, duplex mode = On 8 MB 8 MB 8 MB
KPDL, duplex mode = None 8 MB 8 MB 8 MB
KPDL, duplex mode = On 8 MB 8 MB 12 MB
PCL6/KPDL resource protection, - 10 MB 10 MB
duplex mode = None
PCL6/KPDL resource protection, - 14 MB 14 MB
duplex mode = ON
Item Specification
Memory size in MB 16, 32, 64, 128 MB
Number of pins 100 pins
Access speed 66 MHz
Parity None
Bus width 32 bits