Kyocera FS-1900 - Installing the Waste Toner Box

2-8
FS-1900
2-2-2 Installing the waste toner box
The waste toner bottle must be installed in the printer. It must be properly fitted inside the left cover
as explained below.
1. Open the cap 1 of the waste toner box 2.
2. Open the left cover 3 and install the waste toner box 2 so that it is properly seated in the area
under the drum unit.
3. Close the left cover 3.
Figure 2-2-5 Installing the waste toner box
3
2
2
1
3