Kyocera FS-1900 - Installing the Option Memory Card (Compactflash)

FS-1900
2-15
(7) Installing the option memory card (CompactFlash)
CAUTION Do not insert or remove a memory card (CompactFlash) while power is on. If
the memory card is removed while the printer is on, damage could result in the
printer’s electronics or the memory card.
1. Turn the power switch off.
2. Insert the memory card 1 in the memory card slot 2 at the right bottom of the printer. Insert it
face up, connector end first. Push it in all the way.
Figure 2-2-12 Installing the option memory card
2
1