FS-1900
2-13
5. Open the clips 4 on both ends of the DIMM socket 5.
6. Insert the DIMM 6 into the DIMM socket 5 so that the notches on the DIMM align with the
corresponding protrusions in the slot.
Figure 2-2-10 Inserting the DIMM (2)
(5) Testing the expansion memory
To test the expansion memory, turn printer power on and print a status page. If the installation has
been successful, the Available Memory item of the status page will show the expanded memory
size corresponding to the amount of memory added.
Figure 2-2-9 Inserting the DIMM (1)
7. Close the clips 4 on the DIMM socket 5 to secure the DIMM 6.
6
4
5
4
6
5
44
To Next Page
Loading...
