3-8
FS-1900
3-1-3 Cleaning the printer
To avoid print quality problems, the following printer parts must be cleaned with every toner container
replacement.
(1) Main charger unit
The main charger unit should be cleaned in its two parts, the main charger wire and grid (See figure
below.) whenever the toner container is changed. Cleaning of the main charger can be done without
needing any tools thanks to its self-cleaning system.
Figure 3-1-4 Main charger unit
Grid
Main charger wire
Cleaning pad
Shield
Cleanig knob
To Next Page
Loading...
