Kyocera KM-2560

Internet Faxing (i-FAX)
9-12 OPERATION GUIDE
6 Specify the destination conditions and press [OK].
7 Press [OK].
Other ways of specifying the destination
• Using the Address Book (Refer to page 3-16.)
• Using One-touch keys (Refer to page 3-27.)
• Using the Speed Dial key (Refer to page 3-30.)
• Manual redial (recall) (Refer to page 3-31.)
NOTE: In addition to an i-fax, you can include e-mail transmission and
folder (SMB/FTP) transmission to send as one job. For details, refer to the
machine’s Operation Guide.
When the destination includes a fax or i-FAX machine, the color mode
becomes completely monochrome.
Selecting the Resolution
4
Select the resolution suitable for sending originals.
Item Description
Resolution Specify the resolutions that can be received by
the destination fax machine.
If you try to send an i-FAX using a prohibited
resolution, it is automatically changed to a
permitted resolution and then sent.
• 200 × 100 dpi: Permitted (fixed)
• 200 × 200 dpi: Permitted (fixed)
• 200 × 400 dpi: Permitted or prohibited
• 400 × 400 dpi: Permitted or prohibited
• 600 × 600 dpi: Permitted or prohibited
To permit a resolution setting, press the key for
that resolution so that it is highlighted.
To prohibit a resolution, press the key again so
that it is no longer highlighted.
Compression Select a suitable file format for the destination
fax machine.
MH, MR, MMR or JBIG
Paper Size Specify the suitable document size options for
the destination fax machine.
• A4/Letter: Permitted (fixed)
• B4: Permitted or prohibited
• A3/Ledger: Permitted or prohibited
To permit a document size setting, press the key
for that size so that it is highlighted.
To prohibit a setting, press the key again so that
it is no longer highlighted.