FAX Operation (Basic)
3-6 OPERATION GUIDE
[On Hook]
After pressing this key, you can dial the receiving system using the numeric
keys. For details, refer to Manual Send on page 4-11.
NOTE: Use [On Hook] before dialing the recipient’s fax number.
Dialing methods without using the numeric keys
• Using the Address Book (Refer to page 3-16.)
• Using One-touch keys (Refer to page 3-27.)
• Using the Speed Dial key (Refer to page 3-30.)
• Manual redial (recall) (Refer to page 3-31.)
NOTE: In addition to a fax, you can include e-mail transmission and
folder (SMB/FTP) transmission to send as one job. For details, refer to the
machine’s Operation Guide.
When the destination includes fax, the color mode becomes completely
monochrome.
Selecting the Resolution
5
Select the resolution suitable for sending originals.
• 200 × 100 dpi (Normal): when sending originals with standard size
characters
• 200 × 200 dpi (Fine): when sending originals with relatively small
characters and thin lines
Transmission Start
Speed
To change the transmission start speed, press
this key. Select the speed from 33,600 bps,
14,400 bps, and 9,600 bps.
ECM ECM (error correction mode) is a function to
automatically resend an image that has not
been correctly sent or received due to the
effects of noise on the telephone line during
transmission. To change the ECM
communication setting, press this key.
Encrypted
Transmission
To send faxes using encryption, press this key.
For details, refer to Encryption on page 5-59.
Key Description
Typical character size: 10.5 point (example: Resolution Resolution)
Typical character size: 8 point (example:
Resolution Resolution)
To Next Page
Loading...
