FAX Operation (Basic)
OPERATION GUIDE 3-7
• 200 × 400 dpi (Super Fine): when sending originals with minute
characters and lines
• 400 × 400 dpi (Ultra Fine): when sending originals with minute
characters and lines more finely
• 600 × 600 dpi (600dpi): when sending originals with minute characters
and lines as finely as possible
NOTE: The default setting is 200 × 200 dpi (Fine).
The higher the resolution, the clearer the image. However, higher
resolution also means longer send times. Normally, up to 400 × 400 dpi
(Ultra Fine) is recommended.
The machine does not support resolution of 300 × 300 dpi when sending
faxes. If you have selected 300 × 300 dpi, the machine sends faxes after
lowering the resolution to 200 × 200 dpi (Fine).
1 To change the
resolution,
press [Color/
Image], and
then [Scan
Resolution].
NOTE: You can see a preview of the image to be sent by pressing
[Preview]. For details, refer to Previewing Images on page 3-32.
2 Select the
resolution.
3 Press [OK].
Typical character size: 6 point (example:
Resolution Resolution)
Typical character size: 6 point (example:
Resolution Resolution)
Typical character size: 6 point (example:
Resolution Resolution)
Status
6/6/2006 10:00
Color/Image Advanced
Setup
Type of Original/
Transmission
Ready to send.
Original
Zoom
Send
Sending Image
Destination
Density
Quick SetupDestination
Original
Image
Scan
Resolution
Color
Selection
Sharpness Background
Density Adj.
100%
Letter
:
:
:
Letter
1
Preview
Status
6/6/2006 10:00
Cancel OKAdd Shortcut
Ready to send.
Destination
Select fineness of scanning resolution.
The larger the number, the better the
image resolution.
600x600dpi 400x400dpi
Ultra Fine
300x300dpi
200x400dpi
Super Fine
200x100dpi
Normal
200x200dpi
Fine
Scan Resolution
1
Press [OK] to display
the image.
To Next Page
Loading...
