Kyocera TASKalfa 5551ci - Page 25

2L6/2N6/2N5/2N4
1-4-24
6100 DF paper entry sensor
non arrival jam
DF paper entry sensor (DFPES) does not turned on
even if a specified time has elapsed after the machine
eject signal was received (4000-sheet finisher).
K
6101 DF paper entry sensor (DFPES) does not turned on
even if a specified time has elapsed after the machine
eject signal was received (1000-sheet finisher).
K
6110 DF paper entry sensor
stay jam
DF paper entry sensor (DFPES) does not turned off
within specified time of its turning on (4000-sheet fin-
isher).
K
6111 DF paper entry sensor (DFPES) does not turned off
within specified time of its turning on (1000-sheet fin-
isher).
K
6200 DF sub eject sensor non
arrival jam
DF sub eject sensor (DFSES) does not turn on within
specified time of DF paper entry sensor (DFPES) turn-
ing on.
K
6210 DF sub eject sensor stay
jam
DF sub eject sensor (DFSES) does not turned off
within specified time of its turning on.
K
6300 DF middle eject sensor
non arrival jam
DF middle eject sensor (DFMES) does not turn on
within specified time of DF paper entry sensor
(DFPES) turning on (4000-sheet finisher).
K
6301 DF middle eject sensor (DFMES) does not turn on
within specified time of DF paper entry sensor
(DFPES) turning on (1000-sheet finisher).
K
6310 DF middle eject sensor
stay jam
DF middle eject sensor (DFMES) is not turned off
within specified time of its turning on (4000-sheet fin-
isher).
K
6311 DF middle eject sensor (DFMES) is not turned off
within specified time of its turning on (1000-sheet fin-
isher).
K
6400 DF tray upper surface
sensor non arrival jam
DF tray upper surface sensor (DFTUSS) does not turn
on within specified time of DF middle eject sensor
(DFMES) turning on (4000-sheet finisher).
K
6401 DF tray upper surface sensor (DFTUSS) does not turn
on within specified time of DF middle eject sensor
(DFMES) turning on (1000-sheet finisher).
K
6410 DF tray upper surface
sensor stay jam
DF tray upper surface sensor (DFTUSS) is not turned
off within specified time of its turning on (4000-sheet
finisher).
K
6411 DF tray upper surface sensor (DFTUSS) is not turned
off within specified time of its turning on (1000-sheet
finisher).
K
Code Contents Conditions
Jam
location*
*: Refer to figure 1-4-1 for paper misfeed indication (see page 1-4-1).