l Create a New 384:384 Protocol Definition
l Create a New 384:1536 Protocol Definition
l Create a Transfer Map
Create a New 384:384 Protocol Definition
Create a new 384:384 protocol definition using the Add New Protocol wizard.
Note: If the new liquid transfer protocol requires a new destination microplate definition, create it before running the Add
New Protocol wizard. For more information, see Manage Labware Specifications.
1. Click the Add button to start the Add New Protocol wizard. Enter the following information:
l Protocol Name: Enter a name for the new protocol. It must not already be in use.
l Source Plate Type: Select a source plate type from the first drop-down list.
Note: Only Echo qualified source microplates are listed in the Source Plate drop-down list. Contact
Labcyte to add more source plates. For more information, see Contact Information.
l Destination Plate Type: Select a destination plate type from the second drop down list. The destination plate
definition must already exist in the Echo database.
Figure 51: Add new protocol wizard, page 1 of 2
93 PN | 001-11665
USER GUIDE | Echo® 525 Liquid Handler User Guide Echo Liquid Handler Software
To Next Page
Loading...
