Labrie expert 2000 Service Manual

93Expert(t) 2000
TM
Maintenance Manual
6. Disengage the pump;
7. Stop the engine;
8. Clean around the filler cap and
remove it.
9. Use a clean container with a
minimum capacity of 60 US
gallons to collect the oil;
10. To drop the oil, remove the drain
plug under the tank.
11. Completely drain the tank;
12. Once the system emptied,
reinstall the drain plug, ;
13. Remove and clean the strainer
(once a year);
14. Change the return filter element
(twice a year);
15. Open the access cover. (Refer to
"Figure 145. Hydraulic tank" on
page 93 for details.)
16. and clean the inside of the tank
of any metal particles or debris
that may have accumulated at
the bottom;
Figure 145. Hydraulic tank
17. Refill the tank until oil reaches
3/4 of the oil gauge (Figure
1.83).
Note:Use a high quality oil, that has
good performance in cold
weather (if applicable), such
as Shell Tellus T32 or
equivalent (refer to
“Lubrication” on page 123)
The whole system will require
between 50 and 60 gallons;
CAUTION
SOME HYDRAULIC TANKS ARE
PRESSURIZED
(3 TO 5 PSI). UNSCREW
THE
FILLER CAP SLOWLY.
Strainer
Filler/
Breather Cap
Drain Plug
Access
Cover

Labrie expert 2000 Specifications

General

Brand	Labrie
Model	expert 2000
Category	Utility Vehicle
Language	English