Labrie expert 2000 - Speed-Up Switch; Speed-Up Inhibitor Control

23Expert(t) 2000
TM
Maintenance Manual
but rather be used for regular
driving purposes as with any
other vehicle.
Speed-up Switch
The SPEED-UP switch allows the operator
to manually increase the engine RPM
while operating the body moving parts.
That is, turning the switch to
ON will
rev-up the engine to a predetermined
value (usually 900, 1200 or
1500 RPM).
This feature is effective under the
following conditions:
• Control station properly selected.
• Transmission is in neutral.
• Speed-up inhibitor control set to
“Disable”.
Figure 20. Speed-up switch
Note:Increasing the engine RPM
direct and proportionally
affects fuel consumption.
Speed-up Inhibitor
Control
The SPEED-UP INHIBITOR control allows you
to override any RPM speed-up control
existing on the Expert(t) 2000
TM
; in
particular, the packer automatic
SPEED-UP feature. Independently, from
what control station is controlling the
functions of the body moving parts, the
SPEED-UP INHIBITOR control, when
enabled, brings the engine RPM to its
idle value. In other words, when
enabled, this feature disables all other
speed-up functions.
Figure 21. Speed-up inhibitor
control
Speed-up
switch
Speed-up
inhibitor
control