123Expert(t) 2000
TM
Maintenance Manual
LUBRICATION
RECOMMENDED
LUBRICANTS
Grease
Any lithium-base commercial
multipurpose grease may be used.
Hopper Lubrication
Side rails and the exterior of the rollers
should not be greased.
Grease causes sand and other
abrasives to stick to it which leads to
premature wear of the components.
When regularly collecting dry and/or
abrasive refuse material, Labrie
recommends the use of Shell
Malleus® Gl Multi-Lube on the floor
guides and hopper side walls on a
weekly basis to provide optimal
operation of the packer.
The following sections present detailed
lubrication points on packer, crusher
panel, cylinder pins, hopper door’s
headplate bearings and body chassis
hinges.
For a vehicle equipped with special
options such as the commingle unit,
automated arm, glass compartment
and cart tipper, refer to the chapter of
the parts and service manual related to
such options.
Engine Oil
Refer to the engine’s manufacturer
maintenance manual for
recommended type of oil.
Hydraulic Oil
CAUTION
BECAUSE OF ITS INTENSE USE,
THE PACKER AND ITS
ACCESSORIES
MUST BE
LUBRICATED
EVERY WORKING
DAY
.
DANGER
DO NOT MIX DIFFERENT BRAND
OF
OILS. IN DOUBT, DRAIN AND
REFILL
WITH NEW OIL.
To Next Page
Loading...
Need help?
General
