27Expert(t) 2000
TM
Maintenance Manual
MAINTENANCE
In spite of our efforts to build a vehicle
that is as safe as possible, the
operator’s safety certainly depends on
the precautionary measures taken
while operating or servicing the
vehicle.
Note:If in doubt, ask your
supervisor or contact the
Labrie Customer Support
Center for any technical
support you may require.
Establish and apply a periodic
inspection program to keep moving
parts in good working order, properly
adjusted and safe. It is recommended
that a brief inspection be done by the
operator every day and any detected
malfunctions must be reported for
correction before using the equipment.
Once a month, inspect the chassis and
the body for breaks, cracks or any
potential problems. Any defects found
must be repaired without delay. To
ensure the good working order of the
equipment, particular attention should
be paid to structural components in
order to prevent deterioration due to
corrosion; touchups and/or complete
paint jobs should be done when
necessary.