26 CHAPTER 2
Controls
BODY CONTROL
S
TATION
The body control station, located
outside the cab by the body, allows you
to use and control most of the
hydraulic functions of the body.
Figure 24. Body control station
STROBE LIGHT SWITCH
The STROBE LIGHT switch is located on
the control console of the Expert(t)
2000
TM
. It is used to turn on and off the
strobe lights that are installed on the
Expert(t) 2000
TM
. You must turn on the
STROBE LIGHT switch at the beginning of
a work day. See Starting the Vehicle.
Figure 25. Strobe light switch
Emergency Stop
Retract
Start Cycle
Strobe Light
switch