EasyManuals Logo

Labrie expert 2000 Service Manual

Labrie expert 2000
172 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
11Expert(t) 2000
TM
Maintenance Manual
SAFETY PROPS
Safety props are essential safety
devices which are to be used every
time maintenance has to be performed
under a raised body or tailgate. Two
types of safety props are installed on
every Expert(t) 2000
TM
:
the body safety prop is designed to
hold the body in case a
hoist-related failure occurs;
the tailgate safety prop is designed
to hold the tailgate in case a
tailgate-cylinder-related failure
occurs.
Body Safety Prop
To set the body safety prop:
1. Lift the body until the safety prop
is clear to be tilted under the
body;
2. Pull the handle (see Figure 5.
“Safety prop release handle”) to
release the safety prop, then pull
down the safety prop;
Figure 5. Safety prop release handle
3. Slowly lower the body so it rests
properly on the prop (see Figure
6. “Body safety prop”);
DANGER
SAFETY PROPS MUST BE SET
PRIOR
TO PERFORMING ANY
MAINTENANCE
UNDER A RAISED
BODY
OR TAILGATE. FAILURE TO
DO
SO MAY RESULT IN SEVERE
INJURY
OR EVEN DEATH.
DANGER
DO NOT USE PROPS WITH A
LOADED
BODY. NEVER STAND
UNDER
A RAISED AND LOADED
BODY
.
Handle

Table of Contents

Other manuals for Labrie expert 2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Labrie expert 2000 and is the answer not in the manual?

Labrie expert 2000 Specifications

General IconGeneral
BrandLabrie
Modelexpert 2000
CategoryUtility Vehicle
LanguageEnglish

Related product manuals