7Expert(t) 2000
TM
Maintenance Manual
Responsibilities of the
Employee
In accordance with ANSI Z245.1
1999 Standards, it is the
responsibility of the employee:
• To enforce all safety measures to
meet the requirements established
by the employer.
• To operate the Expert(t) 2000
TM
only
after having received instructions
and training in accordance with the
Operator Manual.
• To immediately report to the
employer or supervisor about any
damage or malfunction of the
vehicle.
• To make sure that there is nobody
near the vehicle before activating
any of the controls and be
prepared to stop everything upon
the existence of possible danger.
WARNING
PRIOR TO PERFORMING ANY
MAINTENANCE
ON THE VEHICLE,
ALL SAFETY REGULATIONS
MENTIONED
IN CHAPTER 1 OF
THE
OPERATOR MANUAL, MUST
BE
RESPECTED, ESPECIALLY THE
“LOCKOUT/TAGOUT” ON PAGE 6.
CAUTION
MAINTENANCE PERSONNEL
SHALL
NEVER PERFORM ANY
MAINTENANCE
ON THE
EQUIPMENT
IF THEY ARE NOT
WELL
ACQUAINTED WITH THE
OPERATIONS
OF THE EQUIPMENT
AS
WELL AS ALL SAFETY
PRECAUTIONS
OF SUCH
OPERATIONS
. REFER TO THE
OPERATOR
’S MANUAL BEFORE
ATTEMPTING
TO PERFORM ANY
TYPE
OF WORK ON THE UNIT.