2
Introduction
INTRODUCING THE EXPERT(T) 2000
TM
The Expert(t) 2000
TM
is a side-loading
refuse collection vehicle. It is designed
and built to aid in the manual collection
of different types of refuse by only one
operator.
• Expert(t) 2000
TM
units equipped with
a lifting arm are primarily designed
to be operated by only one person.
If, however, the end user elects to
operate the unit with more than one
worker, the following safety items
shall be installed to protect the
co-worker from hazardous
situations.
For example, an additional set of
sustained manual pressure
controls for each additional worker
shall be provided. The actuation of
the controls shall take place
concurrently in order to operate the
Helping-Hand
TM
lifting arm. The
sustained manual pressure control
shall be located so that the
co-worker pressing it, is not in the
path of the arm and has a clear and
full view of the point of operation.
• In such a case, Labrie
Environmental Group must be
informed of every and all units
equipped with a lifting arm
operated by more than one worker.
Labrie Environmental Group will
then determine and supply, at the
customer’s expense, the required
safety items.
• Please contact the Labrie
Customer Support Center at
1-800-231-2771 for additional
information.
The Expert(t) 2000
TM
is a unit that,
depending on the type of collection it
will be used for, appears in three main
categories: manual, semi automated,
and automated. The Expert(t) 2000
TM
always allows for manual collection,
that is, in whatever configuration the
product is built, manual collection is
available.
Also, the Expert(t) 2000
TM
exists in what
is called a “co-mingle” version where
the body is splitted in half to create two
DANGER
FAILURE TO CONTACT LABRIE
ENVIRONMENTAL GROUP TO
REPORT
A TWO-OPERATOR USE
OF
THE UNIT MAY RESULT IN UNIT
AND
/ OR PROPERTY DAMAGES,
PERSONAL INJURY OR EVEN
DEATH
.