6CHAPTER 1
Safety
vehicle before assigning the
employee to such equipment.
• To keep the vehicle maintained and
properly adjusted to meet the
manufacturer’s standards and
recommendations. For help or
more information, contact the
manufacturer or any authorized
representative.
• To keep record of any breakdowns
or malfunctions of the vehicle as
well as any inspection and
maintenance.
• To ensure the repair of any failures
or malfunctions that may affect the
safe use of the vehicle, always
before it is used again.
• To meet the appropriate lighting
requirements for night shift work (if
permitted).
• To regularly accompany the
operator of the vehicle and take
measures to ensure the smooth
and safe operation of the vehicle.
• To make sure that the backup
alarm works properly while the
vehicle is in reverse.
• To take the necessary measures
that follow a damage or
malfunction report from any
employee.
• To establish and ensure the
application of a “Lockout/Tagout
Procedure” at the time of any
inspection, repair or maintenance
to the vehicle, whether it takes
place on the road or in the garage.
WARNING
PRIOR TO PERFORMING ANY
MAINTENANCE
ON THE VEHICLE,
ALL SAFETY REGULATIONS
MENTIONED
IN CHAPTER 1 OF
THE
OPERATOR MANUAL, MUST
BE
RESPECTED, ESPECIALLY THE
“LOCKOUT/TAGOUT” ON PAGE 6.
CAUTION
MAINTENANCE AND REPAIRS
CARRIED
OUT ON THIS VEHICLE
MUST
ONLY BE DONE BY
QUALIFIED
PERSONNEL WHO IS
FAMILIAR
WITH THE EQUIPMENT.
LABRIE ENVIRONMENTAL GROUP
DECLINES
ANY RESPONSIBILITY
FOR
FAILURES RESULTING
IMPROPER
REPAIRS PERFORMED
BY
THE END USER.
To Next Page
Loading...
Need help?
General
