Labrie expert 2000 Service Manual

95Expert(t) 2000
TM
Maintenance Manual
Figure 147. Hydraulic tank’s filter
head cover
To replace the hydraulic filter, apply
the following procedure:
1. Make sure the parking brake is
applied and the vehicle is tagged
out for maintenance purposes
(refer to “Lockout/Tagout
Procedure” on page 8);
2. Prepare a pan or a bucket to
recuperate oil that will spill out of
the filter housing (2 gallons of
oil);
3. Remove the four (4) bolts of the
filter head cover of the hydraulic
tank (Figure #1.91); this in-tank
return filter system has a
selfclosing trap that is closing as
you remove the cartridge
therefore preventing the whole
tank to empty itself.
4. Change the filter element with a
new one (Figure 148. “Filter
element”);
Figure 148. Filter element
5. Reinstall the filter head cover.
DANGER
APPLY THE LOCKOUT / TAGOUT
PROCEDURE
AT ALL TIMES WHEN
MAINTENANCE
OR INSPECTION IS
CARRIED
OUT ON THE VEHICLE.
Filter Head
Cover
Cover
Retaining
Bolts (4)
WARNING
CHANGE RETURN FILTER ELEMENT
AFTER
THE FIRST 50 HOURS OF
OPERATION
.

Labrie expert 2000 Specifications

General

Brand	Labrie
Model	expert 2000
Category	Utility Vehicle
Language	English