114 CHAPTER 3
Maintenance
At the end of each day :
1. Bleed the water from the air filter
bowl located on the cab console
(Figure 179. “In-cab console”);
2. Unscrew the drain cock;
3. Using a small rag in hand, collect
the water that will come out.
Note:This water trap helps keep
residual moisture out of the air
system.
Figure 179. In-cab console
To avoid affecting control of packer
or other system on the vehicle
(especially under cold weather
conditions), apply the following
procedure:
1. Make sure the parking brake is
applied and the vehicle is tagged
out for maintenance purposes
(refer to “Lockout/Tagout
Procedure” on page 8);
2. Drain all air tanks daily. Refer to
“Air Tank Draining Procedure” on
page 30 for details.
DANGER
APPLY THE LOCKOUT / TAGOUT
PROCEDURE
AT ALL TIMES WHEN
MAINTENANCE
OR INSPECTION IS
CARRIED
OUT ON THE VEHICLE.
Drain Cock
Water Trap
Bleed
DANGER
APPLY THE LOCKOUT / TAGOUT
PROCEDURE
AT ALL TIMES WHEN
MAINTENANCE
OR INSPECTION IS
CARRIED
OUT ON THE VEHICLE.
To Next Page
Loading...
Need help?
General
