EasyManuals Logo

Labrie MINIMAX Maintenance Manual

Default Icon
209 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
2 Introduction
For electrical schematics, refer to the schematics provided with your MINIMAX™ unit;
As for pneumatic and hydraulic schematics for your M
INIMAX™ unit, copies are available from
LabriePlus Service Department.
NOTE: A number of system schematics are included in this manual.
Warranty Registration Form
Do not forget to complete the owner registration form and to send it to Labrie Enviroquip Group.
Make sure to fill out the in-service date. This date will be used as the start date of the warranty period.
If the in-service date is not indicated, the warranty period will start 30 days after the delivery date.
Introducing the MINIMAX
The MINIMAX™ is a side-loading refuse truck to be operated by only one person. It is designed
primarily for the automatic collection of garbage carts with the use of a joystick-controlled Helping
Hand
TM
arm. The lifting capacity of this arm is 450 lbs at a maximum reach of 60 inches. On some
units, a tipper may also be installed. Manual pickup of garbage bags or cans is also possible with the
M
INIMAX™.
Product Overview
On most MINIMAX™ units, a Helping Hand
TM
arm is installed on the right-hand side of the body. This
arm has “close grab” capability, allowing the operator to pick up a cart within 12 inches from the side
of the vehicle with no “swing out” movement.
The M
INIMAX™ is equipped with an 18-inch packer which pushes refuse that has been dumped in the
hopper into the waste body. The packer is also used to unload the body through the tailgate opening.
This feature is called the “Auto-Eject Mode”.
The standard packer cycle time is 12 seconds at 1200 RPM.
The M
INIMAX™ may also be equipped with a full-size crusher panel (optional). It also features a
hinged door on the left-hand side and 1 or 2 hinged doors on the right-hand side (2 doors if an
automated arm is installed).
The M
INIMAX™ is primarily designed to be operated by only one worker. If, however, the end-user
chooses to operate the arm-equipped M
INIMAX™ with more than one worker, they shall advise Labrie
Enviroquip Group of this situation. Labrie will then determine and supply, at the customer’s expense,
the safety items that are required in such a case.
For more information on this, please contact LabriePlus (see page 6).
Danger!
Failure to contact Labrie Enviroquip Group to report a situation where a unit is operated by
more than one worker at a time may result in unit and/or property damage, personal injury
or even death.

Table of Contents

Other manuals for Labrie MINIMAX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Labrie MINIMAX and is the answer not in the manual?

Labrie MINIMAX Specifications

General IconGeneral
BrandLabrie
ModelMINIMAX
CategoryTrucks
LanguageEnglish

Related product manuals