Lubrication 77
Greasing the Optional Crusher Panel
To properly maintain the crusher panel:
1. Grease the crusher panel cylinder heads through grease fittings.
2. Grease the crusher panel bushings.
Figure 4-11
Grease areas
Caution!
Never grease the side rails and the outside of rollers. Sand and other abrasives stick to
grease. This results in premature component wear.
Caution!
Because of their intensive use, the packer and its accessories must be lubricated every
working day.
Grease fittings
Grease fittings
To Next Page
Loading...
Need help?
General
