70 Lubrication
Other important points to note:
The oil must contain anti-wear and anti-foam additives, rust and oxidation neutralizers and self-
protecting agents.
The oil must be absolutely clean and free of contaminants.
Any hydraulic oil that possesses such properties may be used on M
INIMAX™ units.
IMPORTANT: It is the customer’s responsibility to use oil that is appropriate to the climate.
Engine Oil
Refer to the engine manufacturer’s maintenance manual for recommended type of engine oil.
Transmission Oil
Refer to the transmission manufacturer’s maintenance manual for recommended type of
transmission oil.
ISO Grade 22 32 46
Viscosity @ 100 F, SUS 115 163 231
Viscosity @ 210 F, SUS 43 47 53
Viscosity Index (Min.) 160 147 153
Pour Point -65 F -60 F -54 F
Caution!
Do not mix different brands of oil. In doubt, drain and refill with new oil.
To Next Page
Loading...
Need help?
General
