General Maintenance 29
Replacing the Packer Cylinder
The following procedure details how to replace a faulty packer cylinder.
To remove the packer cylinder:
1. Ensure the parking brake is applied.
2. Start the engine and engage the hydraulic system.
3. Remove the tailgate safety pins (see Figure 3-5) and fully open the tailgate by pressing the
T
AILGATE UP switch on the control panel (see Figure 3-6).
Figure 3-5
Safety pin
Figure 3-6
Tailgate Up switch
4. Place the tailgate safety prop in service position (see Figure 3-7).
To Next Page
Loading...
Need help?
General
