General Maintenance 25
Hydraulic system Check oil level in tank,
and refill if necessary
X See page 105
Check if the ball valve
(or shut-off valve) on
suction line is open
X See page 85
Check ground for
overnight leaks
X
Check cylinders, pump,
control valve and
system for leaks. Repair
or replace if required
X See page 85
Replace hydraulic filter
a
Twice a
year
See page 120
Drain, flush, clean and
refill strainer
X See page 117
Check pressure X See page 107
Replace breather cap on
tank
X
Hopper area Clean traps on each side X See page 23
Clean dirt around the
packer
X See page 23
Rollers, hydraulic
cylinder and cylinder
pins, hoses, pipes and
connections, wear of
floor and hopper
sides.
Visually inspect these
items
X See page 26
Body and chassis Check for corrosion X
Keep the contact
surfaces clean between
body and chassis
X
Cart tipper (optional) Grease and inspect all
pivots
X
Check pressure X
a. Also replace the return filter after the first 50 hours of use.
Component/System Verification Daily Weekly Monthly Yearly Page
To Next Page
Loading...
Need help?
General
