Laser 128 - Call

BASIC COMMANDS AND STATEMENTS
3.2 CALL
Purpose: To use an assembly language
subroutine.
Format: CALL expression
Comments: This statement transfers
Examp le:
program flow to an assembly
la nguage subroutine.
expression is the entry address
of the machine langu age routine
and it must be in decimal.
] 300 ASSEM = 64600
] 310 CALL ASSEM
]RUN
This CALL returns control to
the ROM-based monitor
program, which then clears the
screen, and displa ys t he prompt
in the HOME position.
II -20