Laser 128 - Chr

3.3 CHR$
Purpose:
BASIC COMMANDS AND STATEME N TS
Converts an ASCII code to its
equivalent character.
Format: CHR$ (n)
Comm en ts: This opera ti on returns the single
character corresponding to the
number n, which mu st be
between 0 and 255.
Example:
The ASCII character code s are
listed in Appendix G.
The following example would
print all the uppercase letters of
the alphabet (ASCII codes 65
through 90).
] IO FOR I = 65 TO 90
] 20 PRINT CHR$(I);
] 30 NEXT I
II-21