Laser 128 - Poke

BASIC COMMANDS AND STATEMENTS
3.43 POKE
Purpose: To write a byte of data into a
specified memory location.
Format: POKE n, m
Comments: The data to be placed in
memory is m, which must be
between 0 and 255. The memory
locations is n, and this must be
in the range 0 to 65,535.
Example:
Important: The computer doe s
not check on the address you
use in the POKE command, so if
you POKE a value into one of
its dedicated memory areas, or
into your BASIC program area,
you may find that the machine
ceases to operate.
) POKE 1000, 10
Il-76