Laser 128 - Hcolor

BASIC COMMANDS AND STATEMENTS
3.19 HCOLOR
Purpose: To set color of subseque n tly
plotted high re sol uti on graphics.
Format: HCOL OR = color code
Comments: For high resolution graphics, the
colors given by col or code are as
follows:
Code Color
0
black
1 green
2
magenta
3 white
4
black
5 red
6 blue
7 white
Ex ample: ] 10 HGR2
] 20 FOR I = 0 TO 279
] 30 HCOLOR = 1/40 + 1
] 40 HPLOT I, 0 TO I, 191
] 50 NEXT I
Run this program a nd you will
see 7 colored vertical bars.
II-49