Laser 128 - Page 5

want to use your TV set as the display device, you
should connect a TV interface between the
computer and the TV set.
5. SETTING OF 40/80 COLUMN SWITCH
Some software needs this switch to be set to the 80
column position otherwise the program may break
out. Before running your softwa re, please check
that the switch is set to the required position.
6. SETTING OF ALT /ST D SWITCH
There is a keyboard layout switch on the back
panel of the computer. Setting the switch to the
STD position will give characters displayed as
shown on the keytops. Setting the switch to the
ALT position will give the DVORAK keyboard
layout. E.g. typing the key with "R" on it will give a
"P" character.
lV