Laser 128 - Page 74

When the
computer
ser ia 1
will
INPUT/OUTPUT PORTS
port is activated, the
recognize several
communication commands. A co mmunic atio n
command is made up of a "lead-in" character
("CTRL-A") and a command character. The
following is a list of all the serial
communication commands available:
CTRL-A "c":
CTRL-A I:
CTRL-A L:
CTRL-A K:
CTRL-A Z:
Change the communication
command "lead-in" character
from "CTRL-A" to the
control-character "c".
Echo the c haracters sent to
the serial port back to the
screen.
Automatically print . a
linefeed character after
each carria ge -return.
Do not print a linefeed
character after each
carriage-return automatical-
ly.
"ZAP" mode: Do not check
for any more commands.
I-61