38
Leica mojo3D, Running the mojo3D for the First Time
3. If you selected Crosstrack, more configuration options are now available on the
Lightbar Mode screen.
• Chase: when Chase mode is on (green), the lightbar represents where the line
is relative to where the vehicle is, and to steer to the line, you steer towards
the light - that is, you chase the light. When Chase mode is off (gray) the
lightbar represents the position of the vehicle relative to the line and to steer
the vehicle onto the line, you steer away from the light to "pull" the light to
the line.
• Crosstrack error per lightbar segment: this setting determines how much
cross track error is represented by each segment in the lightbar. A small
number makes the lightbar more sensitive and hard to follow, but more accu-
rate. A large number makes the lightbar less sensitive and easy to follow, but
less accurate.
Choose your lightbar settings.
4. Tap to continue through the System Settings Wizard.
Cell modem setup,
step-by-step
The mojo3D allows the operator to choose whether to enable or disable the cell
modem.
A Network Data plan for the mojo3D and a SIM card with an active data plan are
required before you can utilize the online features of the mojo3D. Contact your
dealer to obtain the required unlock vouchers.
To Next Page
Loading...
Need help?
General
