Lenovo System x3650 M4 HD - Page 274

Backplane
Retention latch
Figure183.Hot-swapdrivebackplaneinstallation
Step6.Reconnectthecablestotheharddiskdrivebackplane.
Step7.Reinstalltheharddiskdrives(see“Replacingahot-swapdrive”onpage211).
Step8.Installthecover(see“Replacingthecover”onpage196).
Step9.Slidetheserverintotherack.
Step10.Reconnectthepowercordsandanycablesthatyouremoved.
Step11.Turnontheperipheraldevicesandtheserver.
Removingthe8x1.8-inchSSDbackplaneassembly
Usethisinformationtoremovethe8x1.8-inchSSDbackplaneassembly.
Attention:
1.Beforeremovinganycomponentsordisconnectinganycables,keepnoteoftheirrespectivelocations
andhowtheyareconnectedtothesystemboard.
Toremovethe8x1.8-inchhot-swapSSDbackplaneassembly,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”
onpage34.
Step2.Turnofftheserverandperipheraldevicesanddisconnectthepowercordsandallexternalcables,
ifnecessary.
Step3.Iftheserverisinstalledinarack,slideitoutoftherack.
Step4.Removethecover(see“Removingthecover”onpage195).
Step5.Removethedrivefillerpanel.
262LenovoSystemx3650M4HDInstallationandServiceGuide