Lenovo ThinkServer TD340 - Installing or Removing a Non-Hot-Swap Hard Disk Drive

6.Slidethenewhot-swapharddiskdriveintothedrivebayfromthefrontuntilitsnapsintoposition,
andthencompletelyclosethehandle.
Figure72.Installingthehot-swapharddiskdrive
7.Checkthehot-swapharddiskdrivestatusLEDstoensurethattheharddiskdriveisoperatingcorrectly.
Youmighthavetorestarttheserverforthenewlyinstalledharddiskdrivetoberecognized.See
“Hot-swapharddiskdrivestatusLEDs”onpage33
.Iftheharddiskdriveisfaulty,youneedtoreinstall
orreplaceituntilitisoperatingcorrectly.
8.Closeandlockthefrontdoor.
9.Dooneofthefollowing:
•Ifyouareinstallingahot-swapharddiskdrive,savetheremovedharddiskdrivedummytrayin
theeventthatyoulaterremovethehot-swapharddiskdriveandneedadummytraytocoverthe
drivebay.
•Ifyouarereplacingahot-swapharddiskdriveandareinstructedtoreturntheoldhot-swaphard
diskdrive,followallpackaginginstructionsanduseanypackagingmaterialsthataresuppliedto
youforshipping.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•ToconfigureRAID,goto“ConfiguringRAID”onpage72.
Installingorremovinganon-hot-swapharddiskdrive
Thistopicprovidesinstructionsonhowtoinstallorremoveanon-hot-swapharddiskdrive.
Thistopicappliesonlytoservermodelsthatsupportnon-hot-swapharddiskdrives.See“Features”on
page7
formoreinformationaboutthesupportednon-hot-swapharddiskdrives.
134ThinkServerTD340UserGuideandHardwareMaintenanceManual