3.Pullthehandleandcarefullyslidethedummytrayoutofthefrontofthechassis.
Figure83.Removingthedummytray
4.Touchthestatic-protectivepackagethatcontainsthe2.5-inchsolid-statedrivetoanyunpaintedsurface
ontheoutsideoftheserver.Then,takethesolid-statedriveoutofthepackage.
Note:Donottouchthecircuitboardonthesolid-statedrive.
146ThinkServerTD340UserGuideandHardwareMaintenanceManual