Step 2. Locate the feature pack submodel ID.
a. From the ThinkSystem System Manager, select Support.
b. Select the Support Center tile.
c. On the Support Resources tab, locate and select the Storage Array Profile link.
d. Type feature pack submodel ID in the text box, and click Find.
e. Locate the feature pack submodel ID for the starting configuration.
Step 3. Using the feature pack submodel ID, locate the corresponding Controller submodel ID for the
starting configuration and find the Feature Code for the desired ending configuration within the
table below. Then, copy that Feature Code to a text file.
Chapter 3. Hardware replacement procedures 153
To Next Page
Loading...
