MEL_EV_DSAS_BK_END_HBA_MISWIRE - 0x1702
This event occurs when: A RAID controller detects a SAS adapter miswire.
Event Name - DSAS Back End HBA Miswire
Event description: SAS host adapter miswire detected
Event Group - SAS-Specific Destination Driver
Event Priority - CRITICAL_EVENT
Log Group - System (0x0)
Event Category - Error (0x1)
Event Component Type - Tray Component (ESM, GBIC/SFP, Power Supply, or Fan) (0x0, 0x7)
Event Specific Data - Optional data is not provided with this event.
RecoveryFailureType - REC_SAS_PORT_MISWIRED ( SASMiswire.html ), REC_SAS_HOST_MISWIRE (
SASHostMiswire.html )
MEL_EV_DSAS_ESM_MISWIRE - 0x1704
This event occurs when: A RAID controller detects a SAS IOM (ESM) miswire.
Event Name - DSAS ESM Miswire
Event description: SAS IOM (ESM) miswire detected
Event Group - SAS-Specific Destination Driver
Event Priority - CRITICAL_EVENT
Log Group - System (0x0)
Event Category - Error (0x1)
Event Component Type - Tray Component (ESM, GBIC/SFP, Power Supply, or Fan) (0x0, 0x7)
Event Specific Data - Optional data is not provided with this event.
RecoveryFailureType - REC_SAS_PORT_MISWIRED ( SASMiswire.html ), REC_SAS_CROSS_MISWIRE (
SASChannelMiswire.html )
MEL_EV_DSAS_WPORT_OPT_TO_DEG - 0x1706
This event occurs when: At least one of the phys that comprise a port is determined to be connected to an
attached device, but the remaining port phys cannot connect to or communicate with an attached device.
Event Name - Optimal Wide Port Becomes Degraded
Event description: Optimal wide port becomes degraded
Event Group - SAS-Specific Destination Driver
Chapter 5. System monitoring 197
To Next Page
Loading...
