Determining SAS host identifiers - Windows
For the SAS protocol, you find the SAS addresses using the HBA utility, then use the HBA BIOS to make the
appropriate configuration settings.
Guidelines for HBA utilities:
• Most HBA vendors offer an HBA utility. Depending on your host operating system and CPU, use either the
LSI-sas2flash(6G) or sas3flash(12G) utility.
• Host I/O ports might automatically register if the host context agent is installed.
Step 1. Download the LSI-sas2flash(6G) or sas3flash(12G) utility from your HBA vendor's web site.
Step 2. Install the utility.
Step 3. Use the HBA BIOS to select the appropriate settings for your configuration.
Go to
DE Series Product Support Site, click on the Documentation tab, and look for the
Interoperability Matrix document for recommendations.
46
ThinkSystem DE Series Hardware Installation and Maintenance Guide for 2U Enclosures
To Next Page
Loading...
