Lenovo ThinkSystem DE Series - Page 161

Starting configuration Ending configuration
Feature Code
Con-
troller
submo-
del ID
Base-
board
ports
HIC
ports (if
not
SAS)
Controller
submodel ID
Base-
board
ports
HIC
ports (if
not
SAS)
430
FC iSCSI
429
iSCSI FC B4XX
430
FC iSCSI
431
iSCSI iSCSI B4Y0
431
iSCSI iSCSI
428
FC FC B4XT
431
iSCSI iSCSI
429
iSCSI FC B4XZ
431
iSCSI iSCSI
430
FC iSCSI B4LZ
Starting configuration Ending configuration
Feature Code
Con-
troller
submo-
del ID
Base-
board
ports
HIC
ports (if
not
SAS)
Controller
submodel ID
Base-
board
ports
HIC
ports (if
not
SAS)
DE6000H
432
FC FC
433
iSCSI iSCSI
B4JM
433
iSCSI iSCSI
432
FC FC
B4XD
DE6000F
434
FC FC
435
iSCSI iSCSI
B4JK
435
iSCSI iSCSI
434
FC FC
B4XE
Note: If your Controller submodel ID is not listed, contact DE Series Product Support Site.
Step 4. In System Manager, locate the Feature Enable Identifier.
a. Go to Settings ➙ System.
b. Scroll down to Add-ons.
c. Under Change Feature Pack, locate the Feature Enable Identifier.
d. Copy and paste this 32-digit number to a text file.
Chapter 3. Hardware replacement procedures 155