Lenovo ThinkSystem SR550 - Install the TCM;TPM Adapter; Mainland Only)

Figure 112. TCM/TPM adapter removal
If you are instructed to return the old TCM/TPM adapter, follow all packaging instructions and use any
packaging materials that are provided.
Install the TCM/TPM adapter (for Chinese Mainland only)
Use this information to install the TCM/TPM adapter.
“Read the
installation
Guidelines” on
page 53
“Power off
the server
for this task”
on page 13
“ATTENTION:
Static Sensitive Device
Ground package before opening”
on page 56
To install the TCM/TPM adapter, complete the following steps:
Watch the procedure
A video of this procedure is available at
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
C9jFjZnXQ6AmTXaIdX6_HJ
.
Step 1. Touch the static-protective package that contains the new TCM/TPM adapter to any unpainted
surface on the outside of the server. Then, take the new TCM/TPM adapter out of the package and
place it on a static-protective surface.
Step 2. Insert the TCM/TPM adapter into the TCM/TPM connector on the system board.
142
ThinkSystem SR550 Maintenance Manual