Figure 34. Security bezel removal
Attention: Before you ship the rack with the server installed, reinstall and lock the security bezel
into place.
Install the security bezel
Use this information to install the security bezel.
“Read the
installation
Guidelines” on
page 53
Before installing the security bezel, if you have removed the rack latches, reinstall them. See “Install the rack
latches” on page 70.
To install the security bezel, complete the following steps:
Watch the procedure
A video of this procedure is available at
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
C9jFjZnXQ6AmTXaIdX6_HJ
.
Attention: Before you ship the rack with the server installed, reinstall and lock the security bezel into place.
Chapter 3. Hardware replacement procedures 63
To Next Page
Loading...
