Server models with sixteen 2.5-inch hot-swap drives
Use this section to understand the cable routing for server models with sixteen 2.5-inch hot-swap drives.
Figure 24. Cable routing for server models with sixteen 2.5-inch hot-swap drives and two 8i adapters
Cable
From To
1  SAS signal cable* SAS 0 and SAS 1 connectors on the 
backplane 1
HBA/RAID adapter installed in PCIe 
slot 4: 
•  Gen 3: C0C1
•  Gen 4: C0
2  SAS signal cable* SAS 0 and SAS 1 connectors on the 
backplane 2
HBA/RAID adapter installed in PCIe 
slot 1: 
•  Gen 3: C0C1
•  Gen 4: C0
Chapter 2. Server components 43