CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
S014
CAUTION:
Hazardous voltage, current, and energy levels might be present. Only a qualified service technician is
authorized to remove the covers where the label is attached.
To remove the top cover, complete the following steps:
Watch the procedure
A video of this procedure is available at
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
C9jFjZnXQ6AmTXaIdX6_HJ
.
Figure 29. Top cover removal
Step 1. Use a screwdriver to turn the cover lock to the open position as shown.
Step 2. Press the release button on the cover latch and fully open the cover latch.
Chapter 3. Hardware replacement procedures 57
To Next Page
Loading...
