Table 1. Server specifications (continued)
Specification
Description
System fans
Up to eight dual-rotor hot-swap fans (including two redundant fans)
• Standard fan 4056 (21000 RPM)
• Performance fan 4056 (28000 RPM)
For technical rules for system fans, see “Technical rules for system fans” on page 90.
Minimal configuration for
debugging
• One processor in processor socket 1
• One memory module in slot 3
• One power supply
• One HDD/SSD drive, one M.2 drive, or one 7mm drive (if OS is needed for
debugging)
• Six system fans (with one processor)
Chapter 1. Introduction 7
To Next Page
Loading...
